|
|
|
Read What Our Customers Are Saying about our products, techniques and service… |
|
…I am very impressed with the results of the SD Cold-Ox Black Oxide and Copy Cad systems. Thanks for the great products. I am very satisfied…Rick Pink, via e-mail... |
|
Cheers for the info I do check both your
site and the mother site on a fairly regular basis. The results I achieved from the kits has far outweighed my expectations and received many accolades from my fellow RS Owners Club members. The results of all my hard work were featured in the magazine Fast Ford last month. I have attached some pictures of some parts that were Copy Chromed and Zinc Plated. Regards, Barry West Sussex, England |
|
"I needed to restore parts that had been Cadmium Plated and started by using a Cad kit from a UK supplier but did not find it very friendly or capable of plating to the quality I wanted. I moved to the Eastwood kit that is made in America and found this to be what I was looking for. Eastwood ceased to trade and I had to find an alternative. I saw Caswell's advertisement and decided to give COPY CADtm a try. The results are very good and I can get a good depth of plate, better than the other kits. The finish quality is also good and is maintained even though I have replaced the anodes 3 times now." "It will take some convincing to move me away from Caswell." Barry Cooper of Barry Cooper Motorcycles in Burnham, Buckinghamshire, England (01628 602653) has been electroplating for the past 15 years. |
|
|
|
I love your nickel and copper kits -- they are doing great work for my bicycle parts. Thanks! Joshua Putnam via e-mail |
|
|
|
When I received your Zinc Plating Kit I read the instructions completely and found them informative, complete and easy to understand. In my opinion, I have turned out plating of material superior to what I have been able to obtain from the commercial platers that I have used in the San Francisco bay area. Steve Kramer, Show Chairman, Northern California National Corvette Restorer's Society. |
|
|
|
After searching all of Colombia University's libraries back to the 1800's, I can truly say that The Complete Plating Manual is the best resource for actually achieving electroplating success. George Manuel Maltezos, Columbia University School of Engineering and Applied Science, 2001. |
|
|
|
I just tried your Copy Cad Kit last night for the first time. Lots of fun, and worked very well! Roger Los, via e-mail. |
|
|
|
I consider the ( electroless nickel) process a success. The kit appears ideal for a myriad of small items. Tom Brownell, This Old Truck Magazine. |
|
|
|
I've restored three circa 1950 motorbikes with your kits and saved a small fortune by bypassing the local plating houses. No waiting, great sense of self-accomplishment and a lot less expensive -, via e-mail. |
|
…Caswell offers kits that will enable the home restorer to apply plated finishes that will rival the best commercial jobs. Skinned Knuckles Magazine. |
|
|
|
I thought I would let you know I have just started to use you're ELECTROLESS KROME KIT 1.6 Lt. So far the results are excellent, it is as easy to use as you explained, thank you for an excellent product. Robert Gardiner. Pontyberem Carms. (E-mail) |
|
|
|
I congratulate you on your manual. It is very well done and easy to follow and has very good ideas - Mr Medlicott, Powys, Wales |
|
|
