BLACK KROME PLATING KIT

 

  

 

This spectacular product will add style and elegance to many products.  This is an ideal product for use on vehicle trim, guns, musical instruments and fishing lures, etc.

The system will plate within a couple of minutes over a nickel or copper base. To plate over chrome, the existing chrome plate must be removed by stripping with SD Anodise and Chrome Stripper.

  
  For tank (immersion) plating, the solution is best used at  34°c using a stainless steel anode. Because the plate is derived from the solution and not the anode, the solution will need to be replaced periodically. 

When plating over nickel, the colour will have a metallic smoky black look, whereas over copper, a darker black will be achieved.  The finish should be waxed with a silicone wax.

  
 

3.7 litre kit

1 x 6 litre Tank & Lid,

1 x Stainless Steel Anode,

3.7litre Black Krome™ Solution,

1 x 100 Watt 34oc Heater

Air Agitator - Air pump, tube and bubbler

Instructions,

Free Technical Support

 

  
BLKR1G                       BLACK KROME™ PLATING KIT 3.7 LITRES                        £134.00
   

Return to Home Page