|
||||||||||
|
||||||||||
| Brush Plating Sundries | ||||||||||
|
Commercial Size Wands |
||||||||||
|
These wands are made to hold a greater amount of plating solution to aid the operator in the flow and deposition of the plated metal over the work-piece. They have a lambs wool type swab which is removable and washable for economy |
The Wand Set |
The crocodile clip or 4mm pin plug from the power supply will clip easily into the end of the wand making a good electrical connection.
The wand rod is made from Stainless Steel with a good rubber insulating handle. They will last a considerable time. |
||||||||
|
|
||||||||||
|
|
|
||||||||
|
The Standard Wand: is used with the swab to plate the metal out of solution and onto the part. As the metal used up in the solution it must be replaced when it no longer supplies a plate. |
The Anode Wand: is used where the solution
needs support from an anode of the same metal. A strip of Copper,
Zinc, Tin or Brass is inserted into a slot in the wand and will replace
some of the metal removed from the solution during plating. This
helps the solution go further and allows a better flow of metal ions.
|
The Curved Wand: is for items that have a radius and allows a better contact with the surface being plated. This item in not currently supplied as an Anode wand. The wand is ideal for tubes or dished items or for example when applying a Zinc surface to a car body repair. | ||||||||
|
Swabs |
||||||||||
|
A swab is supplied with each wand. They can be purchased separately or more economically in packs of 5.
|
||||||||||
| SSW | Standard Swab Wand | £15.52 | |
| ASW | Anode Swab Wand | £18.73 | |
| CSW | Curved Swab Wand | £15.52 | |
| SWSET | Swab Wand Set (3 wands) | £41.73 | |
| SWAB | Swabs |
£ 3.21 |
|
| SWAB5 | Pack of 5 Swabs | £12.84 |