Vibratory Tumblers

Vibratory Tumblers
Applications Of This Product
Polish large amounts of small parts quickly and easily.

Related Products
Flitz Tumbler Additive

Vibratory tumbling is an economical mass finishing technique which gives you a more uniform finish on large quantities of parts in much less time than standard hand finishing, without the mess. It holds the overall shape of the pieces better and allows you to check the progress of the work without stopping the unit. Compact, yet durable, these vibratory tumblers are donut shaped for uniform polishing & maximum coverage, The heavy polyethylene bowls remove easily and quickly for emptying.

Ball-bearing motors operate at relatively low noise levels, have thermal overload protection and are 3000rpm @ 60Hz. One year warranty. Made in USA.

Replacement Bowls are available - ask for prices

The selection of media and compounds shown below are specifically designed to accomplish the finishing needs of the small plating shop.

Proper selection is important to achieve the desired results.

Try adding some Flitz Tumbler/Media Additive in with your media.

3 Quart Size

  • Removable Heavy Polyethylene Bowl With Lid
  • Ball Bearing motor operates on 115 volts. Thermally protected, uses 1.12 Amps
  • 3 qt. capacity 125-400 cartridge cases wt. capacity 10 lb.
  • Vibrates at 3000 VPM
  • Mass creates a cyclonic effect, moves around the bowl and down into the center.
  • Dimensions 10" diameter x 11" high.
  • Shipping wt. - 10 lb.

6 Quart Size

  • Removable Heavy Polyethylene Bowl With Lid
  • 1.5 Gallon Capacity Weight Capacity 18lb 200-700 Cartridge Cases
  • Mass creates a cyclonic effect, moves around the bowl and down into the center.
  • Motor 115 Volts. Thermally protected, uses 1.6 Amps
  • Vibrates at 3000 VPM
  • Overall Dimensions - 11 1/2" Dia x 12 1/2" High.
  • Shipping wt 18 lb

4-3/4 Gallon Size

  • Removable Heavy Polyethylene Bowl With Lid
  • Variable Amplitude for desired finish during deburring.
  • 4 3/4 Gallon Capacity - Weight Capacity 57lb. 1000 - 30.06 Cases
  • Mass creates a cyclonic effect, moves around the bowl and down into the center.
  • Ball Bearing Motor operates on 115 volts. Thermally Protected 1/20 hp uses 1.6 Amps.
  • Vibrates at 3000 VPM
  • Overall Dimensions - 17" Dia x 18" High
  • Shipping wt. 26 lb.
 
VT47786 Vibratory Tumbler - 110V  3 quart 10" diam x 4" deep £346.08
Not Hazardous
47786X Vibratory Tumbler - 220V  3 quart 10" diam x 4" deep £390.88
Not Hazardous
VT47787 Vibratory Tumbler - 110V  6 quart 12" diam x 4.5" deep £514.08
Not Hazardous
47787X Vibratory Tumbler - 220V  6 quart 12" diam x 4.5" deep £536.48
Not Hazardous
VT47788 Vibratory Tumbler - 110V  4-3/4 gal 17.5" diam x 6.5" diam £1096.48
Not Hazardous
47788X Vibratory Tumbler - 220V  4-3/4 gal 17.5" diam x 6.5" diam £1118.88
Not Hazardous
These voltages are USA standard.  They operate at 60Hz and will not operate properly on a UK/ European mains.  A transformer is required.
TB209IN 3 Quart Bowl     £99.68

TB208IN 6 Quart Bowl     £125.44
Not Hazardous
TB210 4.75 Gal Bowl     £334.88
Not Hazardous

Tumbling Media

Ceramic Triangles 1/4"
Coarse aluminum oxide used wet
Aggressive heavy cut down  removes heavy flash
Recommended for heavy cut-down & de-burring
Cycle Time: 3-5 hours
CTD40 Ceramic Triangles 1/4" - Course 5lb

£37.74
Not Hazardous
Ceramic Triangles 1/4"
Medium silica used wet
Standard cut-down removes file and grind marks
1st step in normal cut-down.
Cycle Time: 3-5 hours
CTD30 Ceramic Triangles 1/4" - Medium 5lb

£37.74
Not Hazardous
Ceramic Triangles 1/4"
Fine silica - used wet
Light cutting prepares surface for polishing or plating
2nd step in normal cut-down.
Cycle Time: 2-4 hours
CTD20 Ceramic Triangles 1/4" - Fine 5lb

£37.74
Not Hazardous

Crushed Glass
Clean, white-metal finish
No free silica, heavy metals or other contaminants
Angular shape offers quick stripping (similar to silica in hardness)
Ideal for 1st step cut down
Cycle Time: 3-5 hours
CG5 Crushed Glass 5lb

£16.80
Not Hazardous
Rouge-treated Walnut shell
Non-abrasive rouge used dry
Dry coloring media for final finish
3rd step in finishing process. Leaves some rouge residue
Cycle Time: 5-15 hours
RW47769 Rouge Treated Walnut Shell 5lb

£36.57
Not Hazardous

Untreated Corn Cob
Non-abrasive used dry
Dry coloring media for final finish
3rd step in finishing process.
Cycle Time: 5-15 hours
CC17 Untreated Corn Cob 5lb

£22.51
Not Hazardous
Meta Polish Treated Corn Cob
Non-abrasive used dry
Faster polishing than untreated
3rd step in finishing process.
Cycle Time: 1-5 hours
MPCC20 Meta Polish Treated Corn Cob 5lb

£26.49
Not Hazardous