|
|
 |
|
Achieve a wide variety of
professional results with VHT
products.
|
|
|
|
|
VHT Primecoat
|
VHT Prime Coat is an excellent foundation for any
enamel, epoxy, acrylic or synthetic lacquer. It provides a
tough, air-dry base coat with excellent adhesion to
intermediate and top coatings. VHT Prime Coat is specially
formulated to fill scratches or pin holes caused by
sanding or body fillers to form a strong corrosion
barrier. It is a multi-purpose product, and can be used on
metal, fiberglass, masonry, wood and most plastic
surfaces. It is ideal for automotive, marine, aviation,
home, farm and industrial use.
Choose a primer close to the same color that you will
be using for a finish coat, but not the same color. If you
will be using white for a finish coat, a light gray primer
is recommended. This will allow you to easily see if you
are applying thin, even coats when finishing and will
reduce the paint build up due to making a drastic color
change.
Red Oxide is used on iron and cast or pot metals where
oxidation is a problem. Wipe surface with a solution of
half vinegar and half water to remove oxidation, rinse
thoroughly and let dry. Prime metal within 24 hours of
this process with thin even coats. Lightly sand between
coats for best results.
Yellow Zinc Chromate is used on aluminum surfaces where
oxidation causes most primers to lift. It should also be
recommended for surfaces where the substrate has a
tendency to flex due to rapid changes in temperature or
lack of support. Prime and finish both sides of the
aluminum for long lasting results.
|
VHT Vinyl Dye
VHT Vinyl Dye for vinyl and carpeting
restores or changes the color of any vinyl upholstery,
seats and trim, or the short nap carpeting found in
today's cars, boats and watercraft. It is ideal for use
on stiff or pliable vinyl, simulated leather or plastic.
VHT Vinyl Dye is not a paint but a true dye, which
permanently changes the color of the substrate. It is
extremely resistant to cracking or fading. Careful
preparation is essential and all traces of dirt,
silicone products, vinyl and rubber protectants, oils
and greases must be removed. Incomplete preparation will
not produce a satisfactory result. Warning: It is not
suitable for use on cloth or fabrics.
VHT Vinyl & Plastic Prep is
formulated for use as both a cleaner and surface
preparation before dying or painting. It is safe for use
on all vinyl and plastic. It easily removes skin oils
and silicone based protectants.
|
VHT Polyurethane Wheel Paint
VHT Wheel Paint provides a great finish
and real protection for all standard and custom wheels.
Even on highways, wheels take a beating. Salt, sand,
brake dust and rocks severely damage the appearance and
protection of the wheel surface. This unique product
resists chipping, cracking and fading, while protecting
the wheel surface from oxidation, and is available in
six popular colors plus clear coat. Warning: Clear coat
is for use on polished or bare metal surfaces only, and
should not be used over any painted finishes.
|
VHT Epoxy Plate Finish
|
|
VHT Plate Finish is a unique quick drying formulation
specifically created for application on metal, glass, and
wood or sealed plaster surfaces. This non-tarnishing epoxy
finish has outstanding brilliance and corrosion
resistance. VHT Plate Finish is easy to use and dries in
minutes. Excellent for touch-up, refinishing and
decorative applications. Warning: Do not use any clear
coat finish over these products.
|
VHT Metal Tint
|
|
VHT Metal Tint is a non-tarnishing metallic coating
formulated to give a plated or anodized look to aluminum,
plated or polished metal surfaces. This unequaled product
possesses outstanding brilliance and durability for
interior or exterior surfaces. VHT Metal Tint duplicates
the appearance of expensive anodized coatings, is chemical
resistant and will not oxidize. Can be removed with
acetone.
|
VHT SPORTSMAN CAMOUFLAGE
|
|
VHT Camoflage Paint acrylic enamel spray paint is an
excellent way to revitalize existing camouflaged surfaces
or create new environments. This unique, fast drying,
non-glare formulation is weather resistant and is
specifically made for outdoor use. The exact match colors
are based on military specifications to provide maximum
camouflage characteristics. VHT Sportsman Camouflage Spray
Paint will adhere to metal, wood, masonry and most plastic
surfaces. |
VHT Night Shades
|
|
VHT Nite-Shades is a transparent black tail light lens
coating for creating a custom European styling. When
applied to tail lights, fog lights or turn indicators, VHT
Nite-Shades appears black until they are lit, then the
natural red color appears. Recommended for off road use.
Warning: Once applied to plastic lens, SP-999 is not able
to be satisfactorily removed.
How-To
1. Clean surface to remove rust, wax, grease and dirt.
2. SHAKE CAN WELL for one minute after ball rattles.
Repeat this procedure occasionally during the application.
3. Hold can upright 12 to 16 inches away from surface
being sprayed
4. DO NOT cover with a continuous spray, but release the
spray tip after each stroke and overlap.
5. DO NOT apply more than 2 or 3 even coats, just to color
lense evenly. Allow 6 hours for coating to fully set up
before handling.
6.If clogging develops, remove spray button with a
twisting motion and clean. DO NOT stick pin or other
objects into can. Gently replace spray button with a
twisting motion with top of can and spray button opening
pointing away from you.
7. Clean spray button immediately after use by turning can
upside down and pressing spray button until no paint comes
out.
9. For brighter light use a higher ampere bulb.
|
VHT Brake Caliper, Drum and
Rotor Coatings
|
|
VHT Brake Caliper, Drum and Rotor Paint has been
specifically designed for the custom detailing of brake
components. It is heat resistant to 900F (482C) and will
not chip, crack, fade or rust even under extremes of
operation or road and weather conditions. It is easy to
apply, dries quickly, and is remarkably resistant. Careful
preparation is essential. Brake fluids are often very
difficult to remove.
For increased chemical and heat resistance place in an
oven at 200F for 1 hour. Curing may also be accomplished
with the inherent heat of operation.
Finish is not chemical resistant until cured.
Dry Time
- Dries to the touch in 30-45 mins, thoroughly
overnite
- Curing time required and can be done on or off the
vehicle
|
| VHT Roll Bar &
Chassis Paint |
|
|
Ideal Applications:
- Trailers
- Frame & Chassis
- Roll Bars
- Shop Racks
- Tools & Equipment
VHT Chassis & Roll Bar Paint is a one step epoxy
ester resin that does not require primer. It gives the
appearance of a tough baked-on finish that is chemical,
corrosion, rust and salt resistant.
|
| VHT Hood, Bumper &
Trim Paint |
|
|
Applications:
- Bumpers: Plastic & Rubber
- Body Work: ATV's & Motorcycles
- Body Trim
- Dash Boards
- Kick Panels
- Mirror Casings
VHT Hood, Bumper & Trim urethane coating is
formulated with elastomers that allow for the flexing of
paint on pliable surfaces. This unique formula is also
well suited for fiberglass, plastic and other resin based
bodywork. Equally suited for metal. VHT Hood & Bumper
paint offers excellent hide and mar resistance.
|
|
|
