JUST LIKE THE PROFESSIONALS!

Here is a great way to paint small parts. The process is simple, requiring only an old domestic electric oven to bake the finish on.

Here’s how it works!

Firstly, the surface of the part is suitably prepared, just as you would for any other paint job.

The special gun is attached to an air compressor, and a power unit. The air blows the powder from the gun, and the power unit gives the powder a positive charge. At the same time, the power unit is connected to the piece being coated, and so it has a negative charge. As the positive paint particles fly through the air, they are attracted to the part and lay in an even layer over the entire area of the part. (This works a little like dust on a TV screen)

The part is then placed in a dedicated domestic electric oven at 380 - 450f, and baked for a while, about 15 minutes. This cures the coating to a tough chemical resistant finish.

It is important not to use a gas oven, as the emissions from the coating are flammable. 

A domestic electric oven can be used

1 Year Limited Warranty
Input Voltage: 220volt 60HZ AC
Fixed Output Voltage: 16KVDC 
Manual Discharge 
2 x Powder Gun Cups
3 x Conical Fan Spray Pattern tips
External High Voltage Power Supply
In line filter
Foot switch
Ground Clip Cable

Product Code Name Price
PROD PCGUN125 220volt  Powder Coating System £160.0 + P&P