Red Line EZ100 Powder Coating System

Fully Adjustable Output From 0-100KV

Force-Feed Technology For High Volume, Uniform and Consistent Powder Flow

Watch the Red Line Video for this product

Charge: Controllable up to 100 kV
Powder flow: ForceFeed technology (not gravity-feed) for smooth uniform powder flow

Who would require the RED LINE EZ100 ...

• The entry-level coater - an ideal start-up powder gun
• The casual coater - a hobby powder gun with unbeatable results
• The professional coater - a low cost standby powder gun
• The powder coatings manufacturer - ideal cup/gun for the lab and for on-site work
  

• No control panel required - high performance electronics & pneumatics miniaturized into the gun itself - with virtually no change in the overall weight of the gun
• No hopper required - large sized cup feeder - 0.5 kg (1 lb) capacity
• No messy tubes or cables - all in-built - only your power cable & compressor line
• 1/8" x 28 NPT Female Air Connection (Male Connector Not Included)

The EZ100 is a complete 100 kV powder coating gun

1. Plug into your wall power-socket - 100V - 260V AC 50/60Hz
2. Connect a small air compressor line - 1 - 3 kg/cm2 (14 - 40 psi) pressure
3. Ground the part properly
4. Fill powder in the cup
5. Spray

Download Owner's Manual - (616kb PDF)

Complete Specifications:

• Input Voltage: 100-260 VAC, 50-60hz, Single Phase
• Output Voltage: 100KV - Fully adjustable from 0-100KV
• Air Requirement: Clean, dry air required. 15PSI, 1kg/cm3
• 1/8" x 28 NPT Female Air Connection
• Includes:
  • Powder Coating System
  • 3 Deflectors (12mm, 19mm, 25mm)
  • Flat Spray Nozzle
  • Air Flow Controller
  • Ground cable with clip
  • Powder Cup
  • Power Adapter
  • Instruction Booklet
• 30 Day Manufacturer's Warranty Included. Spare parts and repair service available upon request. (This product is brought over from the USA for your order.  We can not give a longer warranty period for this product)