24ct Gold Tank Plating Kits

CYANIDE FREE SYSTEMS

Gold Plating Watch

Work safely with cyanide free gold to plate jewelry, flatware, baby shoes, flowers, bathroom fittings and much more. 

Caswell 24ct Gold is ideal for immersion plating of larger items. For brush plating applications, please use our FastGold system.

Certainly, tank-plating gold requires much less supervision and effort than brush plating. 24Ct Gold plates @ 2 micro inches per minute using approx 3 volts. Plating time is 30-60 seconds, to provide a durable decorative finish.

An application of a VHT Clear Lacquer or Collinite Wax over a plated item will increase its wear, reduce water spotting and enhance the gold's color.

Cyanide free solution eliminates the dangers of deadly poisoning from ingestion through the skin or from the production of cyanide gas.
Applications Of This Product
Apply gold onto tin, copper, brass, bronze, nickel, silver, gold and most lead free solders.
 
Sample Work Completed With This Product

Gold Plated Clock

Toyota Emblem

Gold Plated Banjo

Telegraph Key
 
You Must Supply

Copper Pipe for tank bar

Copper Wire to hang items

Small amount of electrical wire to make connections

Power Supply
 
Related Products

FastGold

Nickel Plating Kit

Plug N' Plate™ Kits

1 Gallon Kit:

  • 1 x 300ma Power Supply (plates up to 20 sq")
  • 1 Gallon 24 ct Gold Solution
  • 1 x Tank Heater
  • 1 x 2 gal tank with lid
  • 2 x Stainless Steel Anodes
  • The Complete Plating Manual
  • Free Technical Support

2 Gallon Kit:

  • 1 x 300ma Power Supply (plates up to 20 sq ")
  • 2 Gallons 24 ct Gold Solution
  • 1 x Tank Heater
  • 1 x 3.5 gal tank with lid
  • 2 x Stainless Steel Anodes
  • The Complete Plating Manual
  • Free Technical Support

The system operates with either stainless steel anodes, or 24 carat gold anodes. Gold anodes prolong the life of the solution, but are obviously very expensive.

Caswell 24ct Gold will plate directly onto tin, copper, brass, bronze, nickel, silver and most lead free solders. Some alloys must be copper or nickel plated first. Steel must be nickel plated first.

Trying to match existing gold supplied by another company is difficult as shades may vary. (It is better to lightly recoat the old gold with a new layer)

The system contains 2 pennyweights gold per US Gallon of solution.

Plating Gold Onto Stainless Steel?

Eliminate nickel plating steps and plate gold directly onto stainless steel parts using our Stainless Steel Activator for Gold. Etch with this product, then plate gold directly onto stainless parts.
GPS54 24 ct Gold Solution 1 pint £117.60
Not Hazardous
GPS85 24 ct Gold Solution 1 quart £211.68
Not Hazardous
GPS5215  24 ct Gold Solution 1 Gallon £734.72
Not Hazardous
GPS5395 24 ct Gold Solution 2 Gallons £1260.00
Not Hazardous
ANSTP1G Anodize & Chrome Stripper (concentrate) 1 kg (makes 9litres) £26.75
No Air Shipping
ANSTP4OZ  Anodize & Chrome Stripper (ready for use) 250ml £7.09
No Air Shipping
CAB10 Cabosil (gold gelling powder) 0.1 lb (Mix with 1 qt of gold) £13.05
Not Hazardous
GLDANOD24  24 ct Gold Anode 3/4" X 1" X 3/1000", 0.01 oz £130.00
Not Hazardous
SSANODE Stainless Steel Anode 4" x 8" £11.59
Not Hazardous
GLD250 24 ct Gold Tank Plating Kit

1 Gallon

 £782.88
Not Hazardous
GLD415 24 ct Gold Tank Plating Kit

2 Gallon

 £1342.88
Not Hazardous
SSAG1 Stainless Steel Activator For Gold 1 Quart £53.31
Not Hazardous