ABRASIVE WHEEL SYSTEM
LOW COST FLEXIBLE GRINDING WHEEL
For use on your buffing machine! Much more abrasive than the toughest greaseless compounds
The Abrasive Wheel System comprises of a special adhesive, and a tough 80 grit aluminium oxide powder.
Cuts through: PAINT, RUST, PLATING
Grinds away: SHARP EDGES, PITS, SCRATCHES,
Parting Lines, Mould Marks,
Tool & Die MARKS, STRETCHED METAL MARKS, BURRS ETC.
The system is ideal for making felt bobs more abrasive. Using a knife or spatula, the thixiotropic adhesive is spread evenly around the face of your wheel.
Finally, roll the wheel into the abrasive using light pressure, ensuring a heavy pickup of the abrasive.
Once the adhesive has hardened on the wheel of your choice, (usually a spiral sewn buffing wheel) the wheel is transformed into a tough, yet somewhat flexible grinding wheel, capable of grinding of plating, paint, rust, and smoothing out all metals.
Leave the coated wheel to air dry for several hours prior to use. Gentle heat from an oven will speed up drying times considerably. Subsequent applications will provide a longer lasting system.
As the grit system wears off, the wheel may be retreated numerous times.
PROD CEMUK4 4oz Buffing Wheel Cement £8.63
PROD ALOXUK80 1 x 1lb Aluminium Oxide 80 grit. £7.48
PROD ALOXUK120 1 x 1lb Aluminium Oxide 120 grit. £7.48
PROD ALOXUK180 1 x 1lb Aluminium Oxide 180 grit. £7.48
PROD ALOX2UK40 1 x 1lb Aluminium Oxide 240 grit. £7.48
Return to Home Page