Brass Plating Kit

Caswell Brass Plating Solution is a unique cyanide-free alkaline brass plating system which plates a true 70/30 yellow-green plate directly onto steel and bright nickel plated surfaces. It can be used for heavy brass plating which will be antiqued (oxidized and relieved). It may also be used for decorative heavy brass if the surface is burnished or buffed and colored with a wheel to remove the slight haze and reveal the true rich brass color for lamp parts, hardware and plumbing fixtures.  

To plate on zinc die cast surfaces, you must plate with Flash Copper™ first.  The system eliminates carbonates. Therefore, there is no carbonate sludge containing cyanide to be disposed of.

Brass tank plating requires an average current of 0.02-0.1 amps per sq. in. and operates in the range of 3-12 Volts. Brass Plating is available on a small scale using Plug N’ plate kits.

Sold in USA measurement - Litres given for indication only.

3.7 Litres Kit:

1 x 1 Gal Tank and Lid

2 x Brass Anodes (4” x 8”)

1 x 100 Watt 34^oC Heater

4 Quarts Brass Solution Part A

2 x 4oz Brass Solution Part B

The Caswell Plating Manual

Free Technical Support

7.4 Litres Kit:

1 x 2 Gal Tank and Lid

2 x Brass Anodes (4” x 8”)

1 x 100 Watt 34^oC Heater

8 Quarts Brass Solution Part A

4 x 4oz Brass Solution Part B

The Caswell Plating Manual

Free Technical Support

14.8 Litres Kit:

1 x 4 Gal Tank and Lid

2 x Brass Anodes (4” x 8”)

2 x 100 Watt 34^oC Heater

16 Quarts Brass Solution Part A

8 x 4oz Brass Solution Part B

The Caswell Plating Manual

Free Technical Support