FERTANŽ Rust converter

Steel Items before using FERTANŽ

 

No need to remove rust. FERTAN pulverizes it and detaches it from the surface
With FERTAN rust is converted into an ideal paint base.
FERTAN eliminates sanding, deep brushing, sandblasting.
The only sure, irreplaceable rust proofing system for new or old steel structures

It may be applied both on slightly rusty metals and hard rust, as well as on bare metal to protect it from future rust.

It's an aqueous solution, penetrating everywhere under joints and even under paint cracks. It can be applied on damp or wet surfaces. It is harmless to plastic, rubber, chrome and already painted surfaces. FERTAN is only active in contact with iron or rust. It can be washed off from any other surfaces by water. It is non-flammable, harmless to health, physical contact or inhalation.
FERTAN provides long-term protection, as long as the surface is treated or protected by a coating system. It can be applied out of doors in any weather condition, apart from frosty weather.

 


The Same Items After Using  FERTANŽ

Rust Converter

INSTRUCTIONS

Remove loose rust and scale if possible.
Apply FERTAN with brush, roller, sponge or spray.
1 litre covers approximately 12 - 15 square metres ( 1 KG = 2,2 lbs - 108 sq ft ) of oxidized metal surface. FERTAN reacts well on wet surfaces and in very dam/wet conditions. In dry conditions wet the surfaces by light water spray.
It is advisable, however to wait 48 hours at least and check that the rust is completely converted to a black layer. FERTAN treated iron can wait several weeks for the next coat of paint or rust proofing treatment.
Before painting or protecting the fertanized surfaces it is advisable to wash the work with a hosepipe or remove the black dust ( not the layer ) from rust conversion with a wet rag.
FERTAN can by applied on any other rust- proofing treatment and is recommended for intervals of maintenance  on previously painted oxydised areas.
On light coloured paint, any spattering of FERTAN should be washed off within 1 hour of application.

 

SPECIFICATIONS & SAFETY PRECAUTIONS

FERTAN is a dark liquid with a characteristic aromatic odour, slightly acid and a specific weight of 1.18.
FERTAN is nonpoisonous, harmless, nonirritating for humans and nonpolluting for the environment.
In case of contact with skin, wash with plenty of running water.
FERTAN requires no particular safety precautions in storage. It is sufficient to keep the container closed.
Shelf life is practically, in closed containers, unlimited.
Formation of sediment during prolonged storage does not take affect.
In case of leaking or breakage of containers it is recommended to dry with sawdust and wash with water.

 

Return to Fertan Main Page