 |
||||||||||
|
||||||||||
|
||||||||||
|
Low vibration, Operates quietly, Micro Computer Controlled output, Max output 8 L/min
|
AIR PUMP: Air agitation is recommended in some plating operations to eliminate the formation of air bubbles on the part, which could lead to pitting. The air flow will also circulate the electrolyte around teh parts in a constant motion.
|
|||||||||
|
|
The Air Curtain provides a flexible means of distributing the airflow of bubbles around the part, It can be bent into any shape from straight line to a circle. The 70cm lencth allows for good coverage in our plating tanks | |||||||||
|
|
A In-line Valve allows you to control the volume of air and therefore movement that effects the electrolyte. | |||||||||
|
|
The Bubbler is a more localised distributor of the air stream. | |||||||||
|
|
Air Hose for the air agitation units. This is sold by the metre. | |||||||||
|
Filter unit and Agitator. |
||||||||||
|
|
This kit is a great addition to your Copper, Nickel or Copy Chrome™ tank. It provides instant agitation and constant filtering from a submersible pump. Charcoal fits inside the filter case when required to remove organic contaminants. Foam filter removes sediments and solids. No need to use air agitation. After charcoal filtering of Nickel or Copy Chrome add brightener. Brightener treats 4.5 litres of electrolyte. | |||||||||
|
CONTAINS: 1 x Filter Agitator 1 x 150gm Activated Charcoal 1 x 250ml Nickel/Copy Chrome Brightener
|
||||||||||
| Fume Control System | ||||||||||
 |
Due
to the high current usage during chrome plating and anodising, a mist of
acid is produced from the tank. This can become a nuisance due to the
corrosive nature of the product and its yellow stain. The Complete
Plating Manual shows how to control much of this, using an inexpensive
'fume' hood made from an old cooking stove/range hood. Commercial platers also use these floating solid plastic balls to reduce this mist. They are left in the tank and cover the entire surface of the chromic acid solution, reducing the emissions. They will reduce the mist by as much as 70%, saving chemical and keeping the entire operation much cleaner. Approx 90 x 1" polyethylene floating balls are supplied in each pack, which is sufficient to cover one of our 3.5 or 5 gal plating tanks. These balls are also great for other plating tanks, helping to keep heat in the tank, thus requiring less energy to heat the tank.
|
|||||||||
|
|
||||||||||
| Chemical Mist Suppressants | A chemical blanket that actually floats on top of the plating tank and virtually eliminates all misting when used with Fume Control Balls. Use 1 bottle with each bag of fume control balls. | |||||||||
