Surface Products (Europe) Ltd
Oak Farm Nursery
VAT Number: GB231 0943 42
Company Reg No: 9737646
ECO FRIENDLY RUST REMOVER THAT REALLY WORKS
Our Rust Remover is a compound specifically developed for removing rust/ corrosion from steel and iron. It is supplied as a 1 litre, 2.5 litre and 5 Litre concentrate for you to mix with 9-10 litres of water. This large volume allows components to be immersed in the solution in order to De-Rust.
Our solution will remove the heaviest corrosion leaving components and Metals bright and rust free. It is safe and easy to use. It is highly effective without producing noxious fumes or using hazardous chemicals.
If you are not going to use the metal straight away you will need to coat the metal to stop it from rusting, if you are going to paint or Patina stain the metal then you will not want to use anything that is oil based products or spray lubricants, as this will effect the quality of the finished product, By using a Rust Inhibitor, you can spray this on and it will stop rust forming, but will not have any effect when you paint or Patina Finish.
Put seven litres of water of warm water (50°C) into a bowl and slowly mix in one litre of Rusty Metal Solution. Then mix in three more litres of heated water.
Place rusty components in the solution and leave from between 30 minutes and 12 hours at 20° C, the higher the temperature of the solution the quicker it will remove the corrosion. In a commercial situation we would recommend holding the tank temperature between 32°C and 36°C and expect corrosion to be removed somewhere between 5 minutes and 3 hours. Badly rusted items can take up to 12 hours. Temperature doesn't effect the cleaning, just the speed of operation and it can be raised to 60°C for more speedy working.
Whilst Rusty Metal Solution is cleaning your components it is worthwhile lightly brushing the components to remove the loosened rust. Washing up brushes with their stiff nylon bristles are ideal for this.
Rinse cleaned items in ordinary tap water and dry. The surface of the metal is very active at this time and you should apply a protective coat immediately. Bright steel in the normal UK conditions will start to rust after fifteen minutes, just as it would from shot blasting. If you are using Rusty Metal Solution to de-rust the inside of a tank then by all means use the tank as the mixing vessel. Once it is free of rust rinse it thoroughly with tap water and dry.
Rusty Metal solution is safe and easy to use. It is highly effective but produces no noxious fumes and contains no hazardous chemicals.After use the Rusty Meal solution solution can be placed in a suitable plastic container and stored for future use. Filter out the loose rust through a coffee filter before storing.
Please note that our shipping prices are a higher than it would cost to send a normal parcel via the post, the reason for this is because any product that contains chemicals must be sent and packed as per the "hazardous goods" regulations, and be transported by a carrier that is licensed to be able to transport. we are unable to send by regular post as it is now a criminal offence to send undeclared hazardous goods, for postage rates please click on the tab above.
VAT ON SALES TO MAINLAND EUROPE
Sales to European Countries outside of the UK will be charged VAT, if you are VAT registered in a European country, please send us your VAT Number, Verification of VAT numbers must now be carried out manually via the EU Commission VIES Validation website, once we have your VAT number we can then get validation and can either credit back the VAT or issue an invoice free of VAT We are unable to verify your VAT at our checkout process, as the EU Website does not allow third party integrations from external websites
For customers in Bosnia & Herzegovina, Gibraltar, Liechenstein, Norway and Switzerland, the invoice produced will be free of VAT, but there is a charge of £21.75 for import clearance please complete our contact page form, or email us on email@example.com, alternatively you can call us on +44 1252 560515