Complete Restoration Kit for Tanks up to 15 Litres

£59.50
(4 reviews) Write a Review
Shipping Weight:
2.00 KGS
Shipping:
Calculated at Checkout
{* *}
Complete Restoration Kit for Tanks up to 15 Litres

 tank-line-up.png

ETHANOL PROOF FUEL TANK RENOVATION KIT FOR FUEL TANKS THAT HOLD UP TO 15 LITRES OF FUEL

THIS KIT IS FOR COMPLETE RENOVATION

One of the biggest problems with todays fuels is the ethanol content, many fuel tanks have been fitted with Tanks sealers in the past few years, and now you are finding small bits that resemble varnish in your Carburetor blocking up the jets, or can see that the tanks sealer has started to break up and rust is starting appear beneath it.

Our 3 stage process kit will remove the old tank sealer, de rust the tank, and then fit a new liner that will always be Ethanol proof.

STAGE 1

Use the Caswell Tank Seal Remover to remove the old seal, this product was manufactured to remove Kreem and POR15, the most common sealers to fail, the product works on vapour, so 1 Litre is enough for the biggest of motorcycle fuel tanks, this will either turn the old seal back to a liquid or will make if fall away in chunks, after washing out (we use dishwasher tablets in Hot Water), if the Tank Seal Remover will not remove areas were when originally applied was to thick, as long as its stable, it is OK to put the new seal over the top.

STAGE 2

Mix the Fuel Tank Rust Remover with Tap water, 1 Litre to 9 Litres of Water, leave in the fuel tank over night, and you will awake to a lovely clean fuel tank, if you cannot seal straight away, keep it in a dry place as it will not take long for the rust to start again. You are now ready to apply the Tank Sealer

STAGE 3

Mix Part A and B together, you will end up with a solution similar to treacle, pour it in the tank, and roll it around, it will stick to the sides, and create a lining for the tank, it will set solid in 24 hours, but we advise you that you should leave for 7 days. This is a brief description of all the process, but the kits are supplied with full instructions and are available in German and French if needed.

Fibreglass and Plastic Fuel Tanks

All Caswell Fuel Tank Sealer are ethanol proof, we advise against using our tank seal remover in Plastic or Fibreglass Tanks as its to aggressive, the only way to remove the old seal is manually, for tanks sealers for Fibreglass and Plastic for fuel tanks that hold up to 15 Litres of Fuel CLICK HERE, and for Fuel Tanks that hold up to 33 Litres CLICK HERE

We recommend that if you use any thinners to clean the tank, please only use Lacquer thinners, as there is a chance that some other thinners will contain chemicals that react and could cause the seal to weaken.

The Kit is available in 2 sizes, The Mini Kit is for Fuel Tanks that hold up to 15 Litres of Fuel, and the larger kit for tanks that hold up to 33 Litres, once the tins are opened they have a shelf life of approx 6 months.

BELOW IS AN ARTICLE FROM PRACTICAL SPORTS BIKE SHOWING HOW TO APPLY THE TANK SEALER

sportbikes-editorial.png

 

SHIPPING INFORMATION

Please note that our shipping prices are a higher than it would cost to send a normal parcel via the post, the reason for this is because any product that contains chemicals must be sent and packed as per the "hazardous goods" regulations, and be transported by a carrier that is licensed to be able to transport. we are unable to send by regular post as it is now a criminal offence to send undeclared hazardous goods, for postage rates please click on the tab above.

VAT ON SALES TO MAINLAND EUROPE

Sales to European Countries outside of the UK will be charged VAT, if you are VAT registered in a European country, please send us your VAT Number, Verification of VAT numbers must now be carried out manually via the EU Commission VIES Validation website, once we have your VAT number we can then get validation and can  either credit back the VAT or issue an invoice free of VAT

We are unable to very your VAT at our checkout process, as the EU Website does not allow third party integrations from external websites

For customers in Bosnia & Herzegovina, Gibraltar, Liechenstein, Norway and Switzerland, the invoice produced will be free of VAT, but there is a charge of £21.75 for import clearance

please complete our contact page form, or email us on info@caswelleurope.co.uk, alternatively you can call us on +44 1252 560515

4 Reviews
  • 5
    RS250 Aprilia

    Posted by Unknown on 20th Sep 2017

    Ideal for plastic tanks& stops them expanding like my one did, nearly 10mm!!

  • 5
    the best for modern fuel

    Posted by Unknown on 2nd Aug 2017

    easy to use. great instructions.done the job

  • 5
    clear instructions

    Posted by D B Spreadbury on 14th Jun 2017

    so far so good

  • 5
    keeping my old moto-guzzi going

    Posted by Unknown on 10th Apr 2017

    after reading how ethanol is destroying petrol tanks I looked at my moto -guzzi tank inside and noticed that rust was beginning to form near the petrol taps and also paint inside tank was peeling off,so looking at various different makes I bought caswell large kit.no instructions with the kit but plenty on youtube .I took my time doing the job and it has come out superb and should last the life of the bike ,its already 30 years old.its a bit costly but its worth it.

Question. Will your Renovation Kit work on a Plastic or Fibreglass tank Answer. You would need to buy just the sealer, obviously the Rust Remover is not required, and the Tank Seal Remover is to aggressive for Plastic or Fibreglass