SD Cond-OX (Black Oxide Stage 2)

£16.50
SKU:
SDCOND-OX-500ml
UPC:
5060412650595
Weight:
1.00 KGS

Product Overview

SD COND OX STEEL CONDITIONER (PART 2 OF THE BLACK OXIDE PROCESS)

SD Cond-Ox conditioner has been specially developed as a surface-conditioning product primarily for use in the SD Cold-Ox room temperature blacking process. It is of particular use where different types of steel are processed through the same SD Cold-Ox solution to ensure a uniformed finish on all components.  

During the pre-cleaning stage prior to blacking, certain steels will release carbon which will form a smut on the steel surface and may cause the subsequent black deposit to be less adherent.  This is certainly the case with cast steels.  An intermediate immersion in a solution of SD Cond-Ox will greatly reduce this problem.  It will also increase the adhesion on low carbon steels. 

coldox.jpg

 

DIRECTIONS FOR USE

A 10% solution of SD Cond-Ox (1 part SD Cond-Ox to 9 parts mains water) is recommended.

A 2-minute immersion will be adequate for most steels but this can be varied between 1 minute and 10 minutes if required.  Good water rinsing is essential after conditioning and before immersion in the SD Cold-Ox tank.  Operating temperatures should be between 15 and 30 C.

Replenishment of the solution is not normally necessary but if after a period of blacking the effect on the steel diminishes, make a new batch of solution and proceed as before.  Breakdown of the solution is usually caused through the carry over of the cleaner/ degreaser.  Tanks can be made of Polyethylene and plastic buckets make good tanks.

Ensure that there is adequate water for rinsing. This product is an integral part of the SD Cold-Ox blacking process to ensure a quality finish.

DOWNLOAD GUIDE FOR BLACK OXIDIZING

  

SHIPPING INFORMATION

Please note that our shipping prices are a higher than it would cost to send a normal parcel via the post, the reason for this is because any product that contains chemicals must be sent and packed as per the "hazardous goods" regulations, and be transported by a carrier that is licensed to be able to transport. we are unable to send by regular post as it is now a criminal offence to send undeclared hazardous goods, for postage rates please click on the tab above.

VAT ON BUSINESS SALES TO MAINLAND EUROPE

If you are a VAT Registered company in Mainland Europe, when completing the "New Account" form at checkout, as seen below, please enter your European VAT Number, it will then be verified direct with the EU Commission website, and you will not be charged VAT on your order.

(services are subject to the reverse charge and VAT is to be accounted for by the recipient as per Article 196 of Council Directive 2006/112/EC.)

For customers in Bosnia & Herzegovina, Gibraltar, Liechenstein, Norway and Switzerland, the invoice produced will automatically be free of VAT.

screenshot-2020-01-08-at-10.04.54.png