|
Metal X Nickel Strippers
|
||
|
NO ELECTRICITY NO CYANIDES NO PHOSPHATES NO CAUSTIC AMINES NO AMMONIA NO FUMES
|
The
only one-component, non-toxic, powdered, immersion nickel strippers on
the market. Removes NICKEL
from steel, copper, brass and zinc die-cast, silver and gold. Strip nickel without electricity or dangerous chemicals
Caswell Inc. distributes two MetalX Nickel Strippers:
|
|
|
•
MetalX B-9 strips nickel from steel • MetalX B-929 strips nickel from copper, brass, zinc die-cast, pot metal, silver and gold, without etching the base metal.
|
||
|
MetalX strippers will strip nickel at the rate of 2 mils per hour, and will strip 2.5-6 ounces of nickel per gallon of stripper solution. Electroless nickel will strip at the same rate, providing the phosphorous content does not exceed 5%. Higher phosphorous electroless nickel will take longer to strip. |
||
|
•
2.5 lbs of MetalX stripper makes 1 gallon of stripping solution. •
Use plastic, unlined steel or stainless steel tanks •
Agitation is required during stripping • Stripping tank must operate between 120°F-150°F. To prolong bath life,
heating should be discontinued immediately after stripping
is complete. •
Stainless steel or titanium heaters must be used. No quartz or ceramic
heaters. • Instruction sheet will be provided with purchase.
|
||
|
|
||
|
MXB9 METALX B-9 NICKEL STRIPPER 2.5 LBS £26.86 MXB95 METALX B-9 NICKEL STRIPPER 5 LBS £42.98 MXB929 METALX B-929 NICKEL STRIPPER 2.5 LBS £26.86 MXB9295 METALX B-929 NICKEL STRIPPER 5 LBS £42.98 |
||