Metal X Copper Strippers, Strip Copper From Steel and Aluminium

£55.00
SKU:
METALX
Weight:
1.00 KGS

Product Overview

AN ELECTRICAL COPPER STRIPPER
FOR STRIPPING COPPER FROM STEEL OR ALUMINUM

MetalX Copper Stripper is an electrical copper stripper with the exceptional ability to throw into very deep recesses. It also has the ability to plate out the stripped copper making the bath last indefinitely. It contains no ammonia or ammonia compounds. 

1kg of Copper Stripper makes 3.8 litres of stripping solution.

Use plastic or lined stainless steel tanks. If unlined stainless steel tanks are used, some copper will stick to the tank walls.

Stripping tank can operate at room temperature. In cold climates, heat may be used to raise the tank temp to 26oC-50oC. Use a titanium or glass heater.

Use Stainless Steel or copper cathodes.

Use steel or titanium wire to hang the parts. Copper wire will be dissolved.

A DC power source with an adjustable voltage of 0-12V is required. Amperage requirements are approximately 20 amps per square foot of part surface area. (0.13 amps per square inch)

Agitation should be used. Occasional filtration is recommended to remove small particles of copper from the bath.

To use, connect part to positive side of power supply. Connect cathodes to negative side. Stripping usually requires 3-6V DC.

Instruction sheet will be provided with purchase.

SHIPPING INFORMATION

Please note that our shipping prices are a higher than it would cost to send a normal parcel via the post, the reason for this is because any product that contains chemicals must be sent and packed as per the "hazardous goods" regulations, and be transported by a carrier that is licensed to be able to transport. we are unable to send by regular post as it is now a criminal offence to send undeclared hazardous goods, for postage rates please click on the tab above.

VAT ON BUSINESS SALES TO MAINLAND EUROPE

If you are a VAT Registered company in Mainland Europe, when completing the "New Account" form at checkout, as seen below, please enter your European VAT Number, it will then be verified direct with the EU Commission website, and you will not be charged VAT on your order.

(services are subject to the reverse charge and VAT is to be accounted for by the recipient as per Article 196 of Council Directive 2006/112/EC.)

For customers in Bosnia & Herzegovina, Gibraltar, Liechenstein, Norway and Switzerland, the invoice produced will automatically be free of VAT.

screenshot-2020-01-08-at-10.04.54.png