AR22 RUST INHIBITOR
A corrosion inhibitor is a chemical compound that decreases the corrosion rate of a material, When applying an Oxide Patina when there is moisture in the air. i.e in the Winter, sometimes small rusting will occur, by applying a rust Inhibitor by hand after degreasing, but before Oxide application you can eliminate this problem preventing re-rusting without leaving a visible or interfering film.
This product is suitable for use in soak and spray wash operations. and has a wide range of applications including:- final rinse after phosphate operations, as a light duty cleaner for ferrous and non ferrous metals.
DIRECTIONS FOR USE AS A SPRAY
Apply evenly with the spray gun, and with a cloth work in to the surface until dry, Wear Gloves, and eye protection.
DIRECTIONS FOR USE IN A DIP TANK
Make up concentrations of AR22 vary between 1% - 2% by volume, however optimum concentrations should be determined by trial. Additions of AR22 should start at 1% and increased until desired results are achieved. AR22 is generally operated at a temperature range of 70 - 80c as this will aid flash drying.
Please note that our shipping prices are a higher than it would cost to send a normal parcel via the post, the reason for this is because any product that contains chemicals must be sent and packed as per the "hazardous goods" regulations, and be transported by a carrier that is licensed to be able to transport. we are unable to send by regular post as it is now a criminal offence to send undeclared hazardous goods.
VAT ON SALES TO MAINLAND EUROPE
Sales to European Countries outside of the UK will be charged VAT, if you are VAT registered in a European country, please send us your VAT Number, Verification of VAT numbers must now be carried out manually via the EU Commission VIES Validation website, once we have your VAT number we can then get validation and can either credit back the VAT or issue an invoice free of VAT. We are unable to verify your VAT at our checkout process, as the EU Website does not allow third party integrations from external websites. For customers in Bosnia & Herzegovina, Gibraltar, Liechenstein, Norway and Switzerland, the invoice produced will be free of VAT, but there is a charge of £21.75 for import clearance