Silicone Carbide Dispersion Liquid - 16 fl oz (470ml)

For use with our One-Plate® 1 Electroless Nickel System.

Use 2.5 fl oz of Silicone Carbide dispersion per US gallon of For use with our One-Plate® 1 solution.

Silicone Carbide Electroless Nickel Plating creates an extremely hard and wear resistant surface (almost matching the hardness of diamonds) and is used on parts that bear endure heavy loads with little to no lubrication.

Commonly found on pump shafts, machinery parts and even scissors, this coating will outperform almost all others in durability.

Parts being plated should be non-magnetic, to avoid excess particles being attracted to the part. Mild agitation of the solution is required to ensure the Silicone Carbide particles remain suspended. Manual stirring or part movement in the solution will usually suffice. A small aquarium air pump could also blow air into the solution through some airline.